Products

H-Soft™ TI-100 is a water-soluble amphoteric corrosion inhibitor used in formulations for undercarriage protection, rim protection, aluminum brighteners, and airplane cleaners. It provides corrosion inhibition for both acid and alkaline detergents and is suitable for metalworking, detergent, and aerosol applications.

H-Soft™ TI-400 is a highly efficient corrosion inhibitor for alkaline cleaners, providing protection against flash rusting and undercarriage protection. It is suitable for low-foam alkaline spray washes, offering rust protection, improved wetting, and rinsibility.

T-Det® EPO 92 is a difunctional block copolymer product. It is a nonionic surfactant and relatively non-toxic. However, it is considered to possess low acute oral and skin penetration toxicity, so it should not be used in products for internal use.

T-Det® EPO 88F is a versatile difunctional block copolymer product that functions as a nonionic surfactant and is relatively non-toxic. This product is used across a range of industries, including paper, petroleum, textile, detergent, and agriculture. It is recommended for its excellent dispersing, gelling, wetting, and chemical intermediate properties.

T-Det® EPO 104 is a block copolymer of propylene and ethylene oxide, an effective wetting agent, emulsifier, rinse aid and chemical intermediate used in products for textile, agriculture, paper, petroleum and paint industries. Its nonionic structure makes it compatible with anionic and cationic surfactants and it is stable in the presence of acids, bases, and salts.

Cola®Cor 400 is a water-soluble corrosion inhibitor tailored for use in various metalworking, detergent, and aerosol applications. Its aqueous solutions exhibit minimal foaming and deliver effective corrosion protection at recommended concentrations. Notably, the performance properties of Cola®Cor 400 remain unaffected by water hardness, and any aqueous films formed dry down to non-tacky residues.

Cola®Cor 372 serves as a low-foaming corrosion inhibitor in metalworking fluids, rolling emulsions, and water-based hydraulic fluids. It remains insoluble in water, but water-soluble salts of Cola®Cor 372 can be obtained by neutralization with alkanolamines and hydroxides. These salts are valuable either alone or when combined with other water-soluble corrosion inhibitors or lubricants.

Cola®Cor RP is a non-foaming, water-soluble corrosion inhibitor designed for use with cast iron, steel, and non-ferrous metals like aluminum and copper. It is intended for application in alkaline systems and is recommended as a replacement for sodium nitrite, particularly in cutting and grinding fluids.

Cola®Cor 300 is a water-soluble carboxylate corrosion inhibitor designed for metalworking applications. Its aqueous solutions exhibit very low foaming characteristics and deliver effective corrosion protection when used at typical treatment levels. To achieve optimal rust protection, the solution pH should be adjusted to 8.5 or higher using the amine of choice.

Aquacros® HC-2075 is a high-performance liquid blended phosphate product designed to sequester iron and manganese, as well as hardness salts, while also providing corrosion control. It reduces the build-up of scale in the distribution system, helps to avoid the need for replacing existing piping and associated equipment caused by excessive deposition or under-deposit corrosion, and assists municipalities in meeting the Lead and Copper Rule. It is a clear liquid.

Aquacros® HC-2030 Plus is a 100% orthophosphate product. It is best suited for corrosion control when no sequestering is required. This product has also been proven to be effective for corrosion control in treating membrane process brine concentrate discharge lines.

Aquacros® HC-2050 is a high-performance liquid blended phosphate product designed to sequester iron and manganese as well as hardness salts while also providing corrosion control, reducing build-up of scale in the distribution system, and assisting municipalities in meeting the Lead and Copper Rule. It also reduces the need for replacing existing piping and associated equipment attributed to excessive deposition or under-deposit corrosion.

Aquacros® HC-2060 is a high performance liquid blended phosphate product designed to sequester iron and manganese as well as hardness salts while also providing corrosion control.

Aquacros® HC-2090 is a high-performance liquid blended phosphate product designed to sequester iron and manganese, as well as hardness salts, while also providing corrosion control. It reduces the build-up of scale in the distribution system, helps to prevent the need for replacing existing piping and associated equipment caused by excessive deposition or under-deposit corrosion, and assists municipalities in meeting the Lead and Copper Rule. It is a clear liquid.