Products

H-Sil® SDF 200 cSt is a regular viscosity linear polymer that is often referred to as "polydimethylsiloxane" or "silicone fluid." Its applications include cosmetic ingredients, lubricants for plastics, insulating fluids, household product ingredients, mold-release agents, surface active agents, and many others.

H-Sil® D5 is a volatile cyclic dimethyl silicone fluid that is clear and odorless. This low-toxicity solvent evaporates completely at room temperature and leaves no residue. It is widely used in cosmetics to provide spreading, easy rub-out, and a slick, non-greasy feel to the skin. It is a good cleaning solvent for industrial applications with degreasing properties for dry cleaning and spot treatment applications.

H-Sil® SDF 10,000 cSt is a linear polymer that is often referred to as "high-viscosity polydimethylsiloxane" or "silicone fluid." Its applications include cosmetic ingredients, lubricants for plastics, insulating fluids, household product ingredients, mold-release agents, surface active agents, and many others.

Arquad HTL8-MS is a cleaning ingredient featuring hydrogenated tallowalkyl (2-ethylhexyl) dimethyl ammonium methylsulfate, with 82% actives in water. It functions as a corrosion inhibitor, dispersing agent, emulsifier, stabilizer, and cationic surfactant.

H-Sil® OE is a silicone-based odor eliminator designed for industrial and consumer applications. This product acts as an odor eliminator by neutralizing the nitrogen groups that are present in most odors. It is a concentrate that can be diluted at 5 - 10% by weight in water for most applications. No other additives are needed. Fragrances can be added to the dilution by using common surfactants and fragrance bases. 5% dilutions of H-Sil® OE were successfully compared against leading industrial and consumer products via a test panel, and it consistently outlasted the competitors. At a use level of 5 - 10%, this product was successfully tested against the following odors:

• Smoke
• Butyric acid (body odor)
• Amine odors
• Urine
• Ammonia

T-Mulz® ESHF is the ammonium ether sulfate of a mid-range carbon chain ethoxylate. It is the higher-flash-point version of Foamer ESLF. It has an equally fast wetting time and is supplied as a 58% active product. The active ingredient is supplied in a water/propylene glycol solvent system.

H-Clean™ RDX is a low pH organic salt technology designed to replace traditional mineral and organic acids like hydrochloric, citric, phosphoric, formic, and sulfuric acids, along with their blends. Utilizing “on demand” technology, it releases hydrogen ions (H+) as needed to react with calcium scale and iron oxide, forming water-soluble ions. This makes H-Clean™ RDX a superior, cost-effective alternative to traditional acids. It is DOT non-regulated, non-fuming, non-corrosive to most metals, phosphate-free, and contributes minimally to BOD/COD in effluents.

ICL Group Trisodium Phosphate Anhydrous (TSPA) FG is a powdered substance utilized as both an emulsifier and a buffering agent in cleaning ingredients. In food and nutrition applications, it functions as a sequestrant, used notably in cheese, instant breakfast cereals, and dietary supplements. In industrial and institutional (I&I) cleaning, it is found in alkaline cleaners and steam cleaners. This product is suitable for ovo-lacto vegetarians.

Harcros Sulfuric Acid 93% is a liquid used in mineral processing, oil refining, and wastewater treatment. It is employed in the production of fertilizers and falls under industrial markets, specifically in chemical and industrial manufacturing.

T-Soft® 810AB is a low-foaming amphoteric surfactant with excellent coupling properties, suitable for industrial applications containing moderate electrolytes. Soluble in up to 20% caustic solutions and compatible with anionic, nonionic, and cationic surfactants, it is effective in hard and brine water across a wide pH range, serving as a primary or secondary surfactant.

T-Soft® L60 is an anionic detergent that exhibits excellent emulsification, wetting, and foaming properties. It is used in a wide variety of industrial markets; oil and gas, HI and I, construction, and textiles.

Aristonate® M is a medium molecular weight, low foam oil-soluble sodium alkyl aryl sulfonate. It is a clear, dark brown sodium petroleum sulfonate of medium viscosity, which finds use in a wide variety of applications where low foam emulsification, lubrication, and maximum corrosion protection are required.

Harcros Sulfamic Acid is a ready-to-use product for scale inhibiting in evaporators, food processing machinery, and equipment. Ideal for industrial cleaning, metal manufacturing, and chemical processes.

Jungbunzlauer Trisodium Citrate Dihydrate is utilized in various food and nutrition applications. It functions as a buffering agent, sequestering agent, emulsifying agent, pH control agent, flavor enhancer, and stabilizer. The product is featured as odorless, imparts flavor, and is available in granules, crystals, and powder forms.

Jungbunzlauer Xanthan Gum TNAS-CS is a versatile ingredient offering high viscosity and stability. It functions effectively as a thickener, stabilizer, and suspension aid in various applications such as bar soaps, body lotions, and industrial cleaners. It is compatible across a wide pH range and exhibits excellent shear thinning properties.