Products

Antifoam 8830 Food Grade is a 30% active emulsion of polydimethylsiloxane formulated to control foam in both food and industrial processing. This defoamer is readily diluted with water or process liquids for easy addition to foam-generating solutions. It

Macat® AO-10 is a 30% active solution of decyl (C10) dimethylamine oxide in water. It serves as an effective wetting agent, excellent foam stabilizer, and grease cutter that remains stable in hypochlorite and acid environments.

H Care® CPE-K MB is a naturally derived, excellent water-soluble O/W emulsifier and emulsion stabilizer. It can be used as the primary emulsifier, combining with low HLB co-emulsifiers to achieve highly stable emulsions. It is easily dissolved into the hot water phase during emulsion processing. At low use levels, It will enhance the stability of any emulsion and at higher concentrations will aid in building the viscosity of creams and lotions. It can replace stearic acid salts in most preparations. This product is ideally suited for use in many dermatological and personal care products, providing a silky powdery after-feel. It is completely non-irritating.

Antifoam 8810 Food Grade is a 10% active emulsion of polydimethylsiloxane formulated to control foam in both food and industrial processing. This defoamer is readily diluted with water or process liquids for easy addition to foam-generating solutions. It

H Care® Monolaurin MB is a unique, multifunctional compound made from lauric acid obtained from sustainable plant sources. When compared with standard "monoglycerides," H Care Monolaurin MB has multiple positive characteristics not typically found in a single product, offering elegance and utility to personal care and pharmaceutical products. It is Certified Mass Balance RSPO and is derived from palm oil that contributes to the production of certified sustainable palm oil.

H Care® CPE is an oil-soluble long-chain organic phosphate ester supplied as a free acid in powdered form. It is generally used as a co-emulsifier with low HLB nonionics and is non-irritating to the skin. This product is easily dissolved into either phase during emulsion processing and can be neutralized in situ with various cations. At low use concentrations, it will enhance the stability of emulsions and thicken creams and lotions. It can replace TEA-stearate in most preparations. It is ideally suited for use in many dermatological and personal care products.

Estecare™ P20 is an oil-in-water emulsifier that is primarily used in combination with Estecare SMO. This combination of high and low HLB emulsifiers produces medium, fine-textured lotions and creams for skin and hair care applications. Estecare™ P20 also functions as a spreading aid for many industrial applications and provides water-dispersibility to anhydrous systems. Additionally, Estecare™ P20 can be used as a solubilizer for oils and fragrances.

EsteCare ™ 120AJ is a classical emulsifier for creams and lotions. It has many uses, such as surfactants in detergent formulations both, industrial and domestic. These are also used as cleaning agents, scouring agents, wetting agents and dispersants or emulsifiers in textile formulations. It is also used as emulsifiers, solubalizers in cosmetics and health care formulations.

H Care® LMHS is compatible with anionic, nonionic, amphoteric, and cationic surfactants. When compared to lauramidopropyl betaine, H Care® LMHS exhibits excellent dispersing, emulsifying, antistatic characteristics, and better flash foam and viscosity building capacity with lauryl sulfates and alpha olefin sulfonates. It is stable over a broad pH range in both hard and soft water, with excellent lime soap dispersing properties, and is fully biodegradable. It is a mild surfactant and can reduce the irritation caused by other surfactants.

Macat® RA-600 is the acid form of a complex mixture of mono- and di-phosphate esters on an aliphatic alcohol ethoxylate. It is effective as a wetting agent, foaming agent, detergent, and emulsifier. Supplied in the free acid form, RA-600 is soluble in water, glycol ethers, kerosene, and mineral oil.

Antifoam 8820 Food Grade is a 20% active emulsion of polydimethylsiloxane formulated to control foam in both food and industrial processing. This defoamer is readily diluted with water or process liquids for easy addition to foam-generating solutions. It

T-Soft® ALES-2 is an ammonium lauryl ether sulfate for the healthcare and emulsion polymerization industries and contains 2 moles of E.O.

H Care® DIPA is a DEA-free 1:1 coconut diisopropanolamide derived from triglyceride oil. H Care® DIPA is well-suited for 'natural' formulations. It is stable in neutral, alkaline, and acidic systems. Its appearance is a clear, viscous liquid with a maximum color (Gardner) of 3. The pH (10% aqueous) ranges from 10.0 to 11.5.

Macat® Ultra CDO is a 30% active solution of coco (C12) amidopropyl dimethylamine oxide in water. It functions as an effective wetting agent, outstanding foam booster, grease cutter, and low pH thickener.

T-Soft® PSMO 20 is an oleic acid ester of sorbitol and its mono- and dianhydrides copolymerized with approximately 20 moles of ethylene oxide.