Enhanced TDS
Identification & Functionality
- Chemical Family
- Chemical Name
- Cleaning Ingredients Functions
- Industrial Additives Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Industrial Additives Features
Applications & Uses
- Markets
- Applications
- Applicable Processes
- Industrial Additives End Use
Properties
- Physical Form
- Appearance
- Milky white liquid
- Odor
- Mild, aromatic
- Insoluble in
- Mineral oil, Kerosene, Stoddard solvent
- Soluble in
- Water, Ethanol, Xylene, Ethylene glycol, Carbon tetrachloride, Butyl cellosolve, Corn oil (2%)
- Compatible with
- Anionic surfactants
- Stable in
- Bases, Acids, Salts
- Typical Properties
Value Units Test Method / Conditions Ethylene Oxide Content 14 Moles - HLB Value 14.7 - - Activity min. 99.5 % - Cloud Point 200 - 205 °F - pH (at 1% in Water) 5 - 7 - - Flash Point min. 400 °F open cup Pour Point 67.0 °F - Specific Gravity (at 25°C) 1.07 - - Weight (at 25°C) 8.9 lbs/gal - Viscosity (at 210°F) 89.0 Saybolt Universal Seconds - Hydrophobe Nonylphenol - Product Compatibility Information
It should not be mixed with concentrated oxidizing or reducing agents since the mixture of these compounds with organic compounds could form a potentially explosive mixture.
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
Safety & Health
- Toxicity Information
This product is regarded as non-hazardous. However, it is considered to possess low acute oral and skin penetration. It should not be used in products for internal use.
Caution: This product causes eye irritation. Direct contact would likely result in corneal injury which might persist for a week or longer. Permanent damage is not likely to occur. However, if in contact with skin or eyes, flush with excess water and consult your physician.
Packaging & Availability
- Supplied by
Storage & Handling
- Storage, Stability and Handling Information
T-Det “N” nonionic surfactants are stable non-corrosive products in an anhydrous state. They can be stored in plain steel tanks with piping, valves, and pumps of the same metal. Aqueous solutions of T-Det “N” surfactants must be stored in stainless steel or plastic lined tanks. The nonylphenol-ethylene oxide adducts are slightly hydroscopic. Where necessary, guard against atmospheric moisture pick-up, an inert gas blanket may be used.