Enhanced TDS
Identification & Functionality
- Chemical Family
- Chemical Name
- Industrial Additives Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Industrial Additives Features
Applications & Uses
- Markets
- Applications
- Applicable Processes
- Materials of Construction
Cross-linked polyethylene, fiberglass, stainless steel or lined steel are the preferred materials of construction for bulk tanks. Unlined mild steel, black iron, galvanized steel, copper or brass are not recommended in any part of the feed system. Stainless steel, Viton or Teflon are the best choices for pump heads. For feed lines, polyethylene, PVC or reinforced Tygon tubing is recommended.
- Preparation and Feeding Information
WWT 4620 is a single component solution polymer. It may be fed directly from the container or pre-diluted.
Properties
- Physical Form
- Appearance
- Clear to light yellow liquid
- Typical Properties
Value Units Test Method / Conditions Cationic Charge Very high - - Average Solids Content 20.0 % - Freezing Point 0.0 °C - Bulk Viscosity avg. 850 cPs - - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Appearance Clear - - Vapor Density (at 20°C) 0.804 g/L - Physical State Liquid - - Specific Gravity 1 - 1.2 - - Physical Form Liquid - - Vapor Pressure (at 20°C) 2.3 kPa - Color Colorless to light yellow - - pH 3 - 7 - - Color Colorless to light yellow - - Freezing Point max. 41 °F - Boiling Point min. 212 °F - Flash Point Does not ignite - - Decomposition Temperature min. 302 °F - Physical State Liquid - - pH 3 - 7 - - Miscible in Water - - Freezing Point max. 5 °C - Decomposition Temperature min. 150 °C - Partition Coefficient (n-octanol/water) max. 0 - - Vapor Pressure (at 20°C) 2.3 kPa - Miscible in Water - - Relative Density 1 - 1.2 - - Vapor Density (at 20°C) 0.804 - - Explosive Properties Not Explosive - - Oxidizing Properties Not oxidizing - -
Regulatory & Compliance
- Chemical Inventories
Packaging & Availability
- Supplied by