WWT 2580 is a structured, high molecular weight cationic polyacrylamide in emulsion form, used as a flocculant in a wide variety of municipal and industrial wastewater treatment applications. It has been successfully applied in liquid/solids separation systems, including clarification and dewatering, and is well suited for higher shear applications, such as rotary presses, screw presses and centrifuges.

Functions: Flocculant

Chemical Family: Cationics, Polyacrylamides

Applicable Processes: Industrial Water Treatment, Water Clarification, Water Treatment

Features: High Shear Applications, Improved Dewatering, Medium Molecular Weight

Ask Harcros Chemicals Inc. Questions

Jared Reigle avatar

MN

Samer Saba avatar
  • TypeDocument Name
View All Documents

Enhanced TDS

Identification & Functionality

Features & Benefits

Applications & Uses

Markets
Applications
Applicable Processes
Preparation and Feeding Information
  • WWT 2580 is a single component emulsion polymer that must be pre-diluted in water before use. In most cases, this product should not be applied neat. One method for dilution is adding the neat polymer into the vortex of a mixed tank at a concentration between 0.25 - 1.0% polymer (0.5% is optimum)by weight.
  • The polymer can also be injected through a number of commercially available systems that provide in-line mechanical mixing. Polymer solutions should be aged for 30 - 60 minutes prior to use for best results. Solution shelf life is 8 - 16 hours.
Materials of Construction
  • Cross-linked polyethylene, fiberglass, stainless steel or lined steel are the preferred materials of construction for bulk tanks. Avoid natural rubber and Buna-N gaskets as these materials swell when placed in contact with neat polymer.
  • Unlined mild steel, black iron, galvanized steel, copper or brass are not recommended in any part of the feed system. Stainless steel, Viton or Teflon are the best choices for pump heads. For feed lines, polyethylene, PVC or reinforced Tygon tubing is recommended.

Properties

Physical Form
Appearance
Clear to milky white liquid
Typical Properties
ValueUnitsTest Method / Conditions
Cationic Charge80.0%-
Average Non-volatile Solids47.0%-
Freezing Point0.0°C-
Bulk Viscosity1200.0cPs-
Density8.6 - 8.7lbs/gal-

Regulatory & Compliance

Packaging & Availability

Packaging Type
Supplied by

Storage & Handling

Shelf Life
1 Year
Storage, Stability and Handling Information
  • Suggested in-plant storage life is one year in unopened drums. For best results, store at 50 - 80°F. Bulk tanks should be mixed by periodically recirculating the contents bottom to top. Bulk tanks can also be fitted with an agitator type mixer that reaches the bottom 2 feet of the tank.
  • Do not allow emulsion polymers to freeze. Should freezing occur, allow the product to thaw thoroughly in a heated area and mix well before attempting to use it.
  • For spills of WWT 2580, sprinkle salt, vermiculite or equivalent absorbent over the spill area and sweep the material into approved chemical disposal containers. Do not spray water onto a spill because the resulting gel is very difficult to clean up.