Enhanced TDS
Identification & Functionality
- Chemical Family
- Industrial Additives Functions
- Technologies
- Product Families
Applications & Uses
- Markets
- Applications
- Applicable Processes
- Use Level
- max. 10 mg/l
- Materials of Construction
- Cross-linked polyethylene, fiberglass, stainless steel or lined steel are the preferred materials of construction for bulk tanks.
- Unlined mild steel, black iron, galvanized steel, copper or brass are not recommended in any part of the feed system.
- Stainless steel, Viton or Teflon are the best choices for pump heads.
- For feed lines, polyethylene, PVC or reinforced Tygon tubing is recommended.
- Preparation and Feeding Information
- PWT 3125 is a single component solution polymer.
- It may be fed directly from the container or pre-diluted.
- Uses
- PWT 3125 is a very high charge cationic organic coagulant.
- It is used as a coagulant in a wide variety of municipal and industrial water and wastewater treatment applications.
- It has been successfully applied in liquid/solids separation systems, including clarification and dewatering.
Properties
- Physical Form
- Typical Properties
Value Units Test Method / Conditions Cationic Charge Very high - - Average Solids Content 50.0 % - Freezing Point 0.0 °C - Bulk Viscosity 650 - 1,000 cPs - - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Vapor Density (at 20°C) 0.804 g/L - Specific Gravity (at 20°C) 1.1 - 1.2 - - Vapor Pressure (at 20°C) 2.3 kPa - pH 4 - 7 - - Appearance Clear - - Color Colourless to light yellow - - Miscible in Water - - Physical State Liquid - - Freezing Point max. 0 °C - Partition Coefficient max. 0 - - Boiling Point min. 100 °C -
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
- Regulatory Information
PWT 3125 is approved under NSF/ANSI 60 for drinking water treatment.
Packaging & Availability
- Packaging Type
- Supplied by