T-Mulz® Crystal Inhibitor No.5

1 of 37 products in this brand
T-Mulz® Crystal Inhibitor No.5 has been developed to prevent the precipitation of 2,4-D or MCP in 4# per gallon amine salt formulations upon dilution of the concentrate in hard water containing calcium and magnesium. T-Mulz® Crystal Inhibitor No.5 will prevent sludge formation and avoid clogging of spray nozzles during field applications. Sequestering agents such as EDTA and citric acid require the addition of a chemical equivalent amount of amine to the formulation. Crystal Inhibitor No. 5 does not require additional amine; therefore, it is more economical than the acid-type sequestering agents.

Functions: Crystal Growth Inhibitor

Features: Cost Effective, Reduces Clogging, Sludge Build up Prevention

Technical Data Sheet

Ask Harcros Chemicals Inc. Questions

Jared Reigle avatar

MN

Samer Saba avatar
  • TypeDocument Name
View All Documents

Enhanced TDS

Identification & Functionality

Features & Benefits

Applications & Uses

Use Level
0.7 - 0.14 lbs/gal
Usage Information

It is recommended for use at the rate of approximately 0.7 to 0.14 pounds per gallon (0.75% to 1.50% by weight) of 4 lbs. per gallon 2,4-D or MCP amine concentrate formulations. When good quality 2,4-D or MCP acid is used, the resulting 4 pounds per gallon concentrate containing Crystal Inhibitor No. 5 may be diluted 1 part to 40 parts hard water (1000 ppm as calcium carbonate) without precipitation.

Properties

Physical Form
Appearance
Yellow liquid
Specifications
ValueUnitsTest Method / Conditions
Flash Pointmin. 200°FCleveland Open Cup
Specific Gravity (at 77 °F) approx. 1.05--
Pour Point60°F-
Weight8.75lbs/gal-